KERUI Radiator Recycling Line

Feed the irregularity waste radiator into the pre shredder, then the shredded material will be conveyed through ferrous separator to separate out the ferrous components and the rest material will be conveyed into pulverization system. The pulverized material will be fed into the air separator to get the final separated the copper granules and the aluminum granules. The whole process is guaranteed clean without any pollution due to it is equipped with full cover type dust collection equipment.

Performance of KERUI Radiator Recycling Line

Dust Collection Performancover99%
Iron Separation PerformanceOver 99%
Cu-Alu Separation PerformanceOver 98%

Radiator Recycling Process

The KRCA double shaft shredder a low-speed, high-torque twin-shaft shredding machine. It can squeeze,tear and chop the radiators into small strips with width 5cm and with different length. The chopped material can be fed to next crushing equipment evenly to increase the crushing efficiency and the processing capacity for further granulation.

The KRVC vertical crusher is the high effective system for reducing the size of the incoming material, through cutting and impacting the incoming material in side of the chamber to get the required size material for the further separation by the high speed rotating blades.

The air separator is used to separate most of the aluminum foil to reduce the burden of the next separation device.Feed the crushed material into the inlet hopper of the air separator, the horizontal airflow which is generated by the fan below the hopper will take the falling material to move in different distance by the weight of the material. As the aluminum will be taken to further distance due to the lighter weight compare to the copper. The purity of the separated aluminum can reach to 99% and the capacity of the air separator is 1000-1500kg/h.

The separation is based on the density deference of the two material, the light material will be effected by the air low and the heavy material will be effected by the shaking force then move to two different directions. As the mixed material falling to the separator the aluminum will move with the airflow and the copper will move in opposite direction by the effect of the shaking force, then the two material will be separated. The purity of the separated aluminum can reach to 99% and the capacity of the air separator is 1000-1500kg/h.

Technical Parameters of KERUI Radiator Recycling Line

Double Shaft Shredder

Model	Power(KW)	Blades diameter(mm)	Quantity of blades	Inlet size(mm)	Dimension(mm)	Capacity(kg/h)
KR-600	11	220	24	900*830	295016401800	600-800
KR-800	22	220	32	1200*860	314014601940	800-1000
KR-800	30	320	18	1200*1000	320015002100	1300-1500
KR-1000	37	320	22	1400*1200	340015502140	1500-1700
KR-1200	45	320	28	1600*1200	370016202200	1700-2000

Vertical Compound Crusher

Model	Rotor diameter (mm)	Chamber height(mm)	Main shaft RPM (r/min)	Inlet material size(mm)	Outlet material size(mm)	Capacity (t/h)	Power(kw)	Motor RPM	Out dimension (LWH)(mm)
800	650	800	1350	50	0-5	5-15	4P 30	1440	22008601980
1000	800	850	970	70	0-5	10-30	4P 55	1440	270011602000
1250	1000	850	740	100	0-5	20-60	4P 90	750	280014002730
1500	1250	1000	650	100	0-5	30-80	4P 110	750	310019002300

Our Services

Pre sale service:
1. We can recommend the proper proposal accordingly to meet customer’s request then help customer to choose the proper equipment.
2. Provide the detailed technical parameter of each equipment.
3. Free technical advice.
4. Introduce the relative equipment.

On-purchase service:
1. Report customer the working condition of the order regularly.
2. Pack the machine in export standard.
3. Notice the shipping date in advance.

After sales service
1.Installation&operation: We will guide the user to install the machine on line and help the user to adjust the machine when user changes the raw material. We will inquire user to learn the working condition of the machine regularly and give advice till the user totally know the machine.
2.Warranty: brand new when leaving the factory. we guarantee quality of the machines for a period of one year from the date of a trial run to the finish, but not to exceed thirteen months from the date of which machines away to the delivery port. If any parts (excluding easily damaging parts) are found defective in quality in the first year, the seller should replace free-of-cost. After one year, parts can be replaced on favorable payment basis.
3.Long time free technical support.